[Migrated from old forumParticipant April 10, 2015 at 3:11 pm Post count: 327]

#5803 |

Hi,

I installed a dialplan (developed it with VDP) succesfully. Currently an incoming route transfers a call (via an IVR which calls a custom destination) to a context (vdp-inbound/outbound). That works. However, i need the DID which is called. That information can not be fetched in this way.

How to do that?

thanks.

[Migrated from old forumParticipant April 10, 2015 at 3:11 pm Post count: 327]

#5804 |

Uf, why so complicated… just deploy the dial plan and set DID (number) in the Extension block (start/first block in the dial plan) and it will work.
Visual Dialplan will hook in all context and ‘connect’ it with FreePBX, there is no need to make/change incoming routes, IVRs etc.
In this tutorial you will find much more details and instructions about this:
http://www.apstel.com/visual-dialplan-tutorials/how-to-work-with-elastix-etc/

— Mark

• This reply was modified 10 years, 2 months ago by  admin.