[Migrated from old forumParticipant April 11, 2015 at 4:39 am Post count: 327]

in reply to: Sending DTMF in a variable #5966 |

You may use Custom block for this purposes, just put “Dial(${FAX1},20,D(wwww0${ARG1}w))” in Custom component.

Turku

[Migrated from old forumParticipant April 11, 2015 at 4:38 am Post count: 327]

in reply to: Error occurred while saving the dialplan #5964 |

We started out with the trial version, but even after we purchased the license we ran into this a few times. It’s been saving properly for about a week now without any problems. I found that the problem would arise when working in a specific context (which could be different each time). It was usually the last context I had edited. Sometimes removing my most recent change would allow me to save, and other times deleting the context & re-creating it would do the trick. However, depending on the complexity of the context, deleting it & starting over is not always the best option.

[Migrated from old forumParticipant April 11, 2015 at 4:38 am Post count: 327]

in reply to: Error occurred while saving the dialplan #5963 |

Is this a trial version of visual dialplan? If so, they are limited as to the number of times you can save a dialplan. Perhaps you are running into this??

Kevin

[Migrated from old forumParticipant April 11, 2015 at 4:36 am Post count: 327]

in reply to: External MYSQL Database Connection #5961 |

By default, remote access to MySQL database server is disabled for security reasons. In other words MySQL will not accept connections from other hosts besides local host. To overcome this issue you will need to give permission to the host trying to connect to the MySQL database.

Also you may try with Apstel Integration Server. I am using Integration Server for database and payment server access, it’s so much easier to work with one IS block instead of using several MySQL Addons blocks.
However, the downside is you have to buy additional IS licenses if you wish to handle more than one concurrent call with your dial plan, but it’s worth every dollar.

Gomes

[Migrated from old forumParticipant April 11, 2015 at 4:35 am Post count: 327]

in reply to: Asterisk Record termination key #5959 |

Check y option (starting from asterisk 1.8):
y: Terminate recording if *any* DTMF digit is received.

John

[Migrated from old forumParticipant April 11, 2015 at 4:34 am Post count: 327]

in reply to: Dial Plan capbilities #5957 |

For what you want I believe that it should be possible. For the log it might be good to use a MySQL database (using Integration Server) to keep the status information that you need. All of this should work with Elastix (although I use Trixbox myself).

[Migrated from old forumParticipant April 11, 2015 at 4:33 am Post count: 327]

in reply to: Problem with using Set #5955 |

Jim,

Asterisk defined varibale EXTEN can not be modified with the set command, you should create and use some other variable for this purposes.

Hermann

[Migrated from old forumParticipant April 11, 2015 at 4:32 am Post count: 327]

in reply to: Using GotoIf #5953 |

Here is a simple example on how to save the dialed number and use it later in the dial plan:
http://www.apstel.com/while-loop/how-to-save-dialed-number/

Thorm

• This reply was modified 10 years, 6 months ago by  admin.

[Migrated from old forumParticipant April 11, 2015 at 4:31 am Post count: 327]

in reply to: G1 vs. g1 #5951 |

Mblfone,

You don’t need to change extensions.conf file.
By manually typing for example DAHDI/G1/0123456789 in the Type field and then by pressing the add or update button you could manually configure or update Dial resource.

Hope this helps.

Raman

[Migrated from old forumParticipant April 11, 2015 at 4:31 am Post count: 327]

in reply to: Random callflow branch #5949 |

I’ve now tried it and all is working fine. Thanks very much for all of your help.

[Migrated from old forumParticipant April 11, 2015 at 4:30 am Post count: 327]

in reply to: Random callflow branch #5948 |

Michael,

Thanks for the very prompt reply. I will give it a go.

Lee

[Migrated from old forumParticipant April 11, 2015 at 4:30 am Post count: 327]

in reply to: Random callflow branch #5946 |

Hello Lee,

This is a bug and it will be fixed in the next minor product release.

In the meantime you may use the following work around:
1. Use Set building block to assign random value ​​to a variable, please check link below
http://imageshack.us/photo/my-images/834/picai.png/

2. Then use GotoIf building block to branch the call flow based on the expression result

Michael Denich
Apstel support team

• This reply was modified 10 years, 6 months ago by  Migrated from old forum.

[Migrated from old forumParticipant April 11, 2015 at 4:29 am Post count: 327]

in reply to: Sample dial plan not working #5944 |

Hi Vicky,

Have you noticed note text boxes in Context window. In this text boxes there is a link to a zip file containing all the voice files needed for that sample. For example in time_branching sample you have this comment text box: http://imageshack.us/photo/my-images/11/pic1xo.png/(external link)

I checked time_branching, outbound_banned and is-db-single-select samples from Visual Dialplan 3.1.01 samples folder and they work just fine.
Also I had a little trouble to get IS sample running properly, I added Answer block in front of Agi block and changed host name from localhost to my numeric IP address (xxx.xxx.xxx.xxx) in Integration Server properties window, then it worked as it should. I am using elastix 2.0.4 version.

In addition you may try with newer Visual Dialplan 3.1.06 version, where IS sample issue is fixed.

Could you attach Asterisk command line interface (CLI) log for some non working example?

Raman

[Migrated from old forumParticipant April 11, 2015 at 4:29 am Post count: 327]

in reply to: Sample dial plan not working #5943 |

Hi Raman,
I am using visual dial plan 3.1.01 trial version.
I am using elastic 1.3
I do have few voice samples to successfully run the dial plan.But i have no clue regarding downloading voice files from Apstel site.
Can you please assist me regarding that?

Vicky

[Migrated from old forumParticipant April 11, 2015 at 4:29 am Post count: 327]

in reply to: Sample dial plan not working #5942 |

Vicky,

Can you be a little more specific, which Visual Dialplan version are you using?
Which Asterisk distribution is used (plain asterisk or GUI (Elastix, Trixbox, PIAF, FreePBX..)?

One more question, do you have all the needed voice files for dial plan samples?
In order to successfully run dial plan samples you will need to download the voice files from Apstel site.
The downloaded files need to be placed in the /var/lib/asterisk/sounds/ directory.

Raman