[Migrated from old forumParticipant April 11, 2015 at 1:55 am Post count: 327]

#5849 |

Hello,

I have this issue with Read component, I set it to take maximum of 3 digits and when i run the dialplan it ends after second digit.What’s wrong with this?

Bernard

[Migrated from old forumParticipant April 11, 2015 at 1:55 am Post count: 327]

#5850 |

Bernard,
I just tried this and it works fine for me. Perhaps you have your timeout set to low? I have mine set to max of 3 digits and a timeout of 5 seconds and it works just fine.

Kevin

[Migrated from old forumParticipant April 11, 2015 at 1:55 am Post count: 327]

#5851 |

You’re right, that was the problem, but unfortunately i have another one sad.
When I type in softphone 123, asterisk console shows 112 or 122.
It looks like it combine first 2 digits and ignore the third one.
Do you know what causes this?

Bernard

[Migrated from old forumParticipant April 11, 2015 at 1:55 am Post count: 327]

#5852 |

That sounds like it may be a softphone issue. Which one are you using? Have you downloaded a different one to try and see if that one works? Normally the only time I have seen weirdness like this it has been caused by the softphone or settings for the softphone. Do you have a regular hardware phone you can try at all?

Kevin