Viewing 3 posts - 1 through 3 (of 3 total)
  • Migrated from old forum
    Participant
    April 11, 2015 at 3:04 am
    Post count: 327
    #5911 |

    i have a context in one .vdp file that i would like to use in a new .vdp.

    tried ‘copy’, but then can’t ‘paste’ it. this seems like it would be very handy so you don’t have to start from scratch, or to be able to include parts of example .vdp’s (particularly macros or subroutines) into the .vdp you’re working on.

    Migrated from old forum
    Participant
    April 11, 2015 at 3:04 am
    Post count: 327
    #5912 |

    You may try with the following steps:

    1. ‘copy’ context (go to main window and select one or more contexts or macros you wont to copy, there is no need to go to design window)
    2. check dial plan version
    3. close the current dial plan (not Visual Dialplan)
    4. open or create new dial plan
    5. check dial plan version and make sure it is the same as in 2. step
    6. go to main window and then ‘paste’ it.

    This should do the trick

    Migrated from old forum
    Participant
    April 11, 2015 at 3:04 am
    Post count: 327
    #5913 |

    yes! that worked perfectly, thanks!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.